KP-S390: 2D Panel Mount
KP-S390 2D Panel Mount
KP-S390 2D Panel Mount è un efficiente scanner per montaggio a pannello, che lo rende una soluzione compatta ed affidabile. È dotato di una fotocamera da 0,4 M pixel che esegue la scansione di qualsiasi codice a barre 1D e 2D in maniera rapida e semplice. KP-S390 2D Panel Mount è il dispositivo che consente di leggere rapidamente qualsiasi codice a barre, rendendolo facile da usare nei chioschi informativi, linee di produzione, ecc.
| Physical | Dimensions | Height 9.6 mm, Width 7.7 mm, Depth 2.4 mm | |
| Weight | 160 gr, without cable | ||
| Connector Type | RJ-45 phone jack connector | ||
| Case Material | ABS | ||
| Exit Window Material | Tempered glass | ||
| Indicator | Beeper, LED | ||
| Communication | Interface Supported | USB Keyboard, USB virtual COM, RS-232 (optional) | |
| Performance | Operating Mode | Hand-held, Auto-detection | |
| Programming Method | Manual (reading special barcode) | ||
| Firmware Upgrade | Supported | ||
| Input Voltage | USB 5 ±0.25VDC | ||
| Current | Standby: 45 mA Scanning: 280 mA | ||
| Image Size | 752 x 480 pixels | ||
| Scanning Angle | ±45°, ±45°, 360° (skew, pitch, roll) | ||
| Print Contrast | 20% minimum reflective difference | ||
| Minimum Resolution | 1D（Code 128) 4mil 2D (PDF417) 6.7mils | ||
| Decoding Depth | 10 mil Code39 (3 chars) 25mm – 221mm 13 mil UPC (6 chars) 10 mm – 234mm 20 mil Code39 (5 char) 11mm – 380mm 6.7 mil PDF417 (20 chars) 50mm – 132mm 10 mil QR (20 chars) 23mm – 140mm 10 mil DM (20 chars) 27mm – 159mm 20 mil QR (20 chars) 17mm – 288mm | ||
| Data Capture | Decoding Capability 1D | 1D: UPC-A, UPC-E, UPC-E1, EAN-13, EAN-8, ISBN (Bookland EAN), ISSN, Code 39, Code | |
| Decoding Capability 2D | 2D: PDF417, QR Code, DataMatrix, Han Xin Code, Aztec Code, MicroQR Code, MicroPDF417, GS1 Composite, CodaBlock F, GM Code | ||
| Environmental | Temperature | Operating -10° to 55°C | |
| Humidity | 5% to 95% (non-condensing) | ||
| Sailing | IP52 | ||
| Safety | Safety: EN62471 | ||
| Mechanical Vibration | IEC60064-2-6 | ||
| Mechanical Shock | IEC-60064-2-27 | ||
